Bidirectional PAD communication protocol

From Opendigitalradio
(Difference between revisions)
Jump to: navigation, search
(Replace version by type)

Revision as of 14:59, 6 February 2017

The current ODR-PadEnc to ODR-AudioEnc communication is done through a nonblocking FIFO.

The proposal is to replace it by a UDP-based request/reply protocol.

For every audio frame, the ODR-AudioEnc checks if a block of PAD data is available by doing a nonblocking recv() on the UDP socket. If yes, it inserts it into the audio frame; if not, the audio frame will not contain PAD. In any case, it sends a request to ODR-PadEnc for new data:

   UDP PAD Request - message format
   | type (1 byte) |
   | 0x1 (request) |

ODR-PadEnc prepares the PAD block and answers with a UDP reply message:

   UDP PAD Reply - message format
   | type (1 byte) | PAD data (N bytes) |
   | 0x2 (reply)   |       <PAD>        |

Future versions of the messages as well as new types of messages shall use different values for the type field.

Multi-byte values (none yet) use network endianness (i.e. big-endian).


  • Define the order of bytes for the PAD data
Personal tools