DAB/DAB+ encoding

From Opendigitalradio
(Difference between revisions)
Jump to: navigation, search
(toolame with jack input (BETA))

Revision as of 21:24, 27 December 2011

Encoding the sound to MPEG-2 Layer II for DAB, MPEG-4 HE-AACv2 for DAB+ or video in MPEG-4 H.264 for T-DMB before feeding it to the multiplexer.

Contents

DAB encoding

DAB audio encoding with toolame

  • toolame MPEG-Layer II encoder (DAB)

Using toolame with Jack

Toolame doesn't support jack by default, we use arecord with ALSA emulation to get the raw PCM stream. See Mapping of jack source to ALSA for instructions. It is a dirty workaround, it is foreseen to find a better way in the future for example by modifying toolame to support jack:

Example:

arecord -t raw -f S16_LE -c 2 -r 48000 -D jackplug |toolame -s 48 -D 4 -b 128 /dev/stdin ./1.ff

toolame modified for Jack input (BETA)

Toolame has been modified to support JACK (BETA), rendering the dirty workaround mentioned below unnecessary. See Toolame#JACK_version for more info.

Example:

toolame -D 4 -b 128 -j -n toolame1 ./1.ff

DAB+ encoding

DAB+ audio encoding with crc-dabplus

  • CRC-dabplus HE-AAC encoder (DAB+) from CRC (warning, it is not free/open source because of royalty)

Example streaming one radio and with a buffer to compensate for bursty output from encoder

crc-dabplus -i souphttpsrc://location=http://maxxima.mine.nu:8000 -g -m -c 2 -b 48 -o file:///dev/stdout |mbuffer -m 100k -P 100  >output_fifo 

jack input

crc-dabplus uses Gstreamer for input/output.

Example of jackplug input (ALSA emulation), encoding at 48kbps, output to a FIFO file:

crc-dabplus -i card://jackplug -g -c 2 -b 48 -o file://2.ff

Similar example but with DLS input from TCP on port 12000

crc-dabplus -i card://jackplug -g -c 2 -b 80 -d tcpserver://:12000 -p 28 -t dls -o file://4.ff

Tools for data services encoding

Decoding Internet stream

Here are some simple way to get internet radio stream as input and decode them into raw PCM samples to feed DAB/DAB+ encoders

mpg123 input

"mpg123" can be used to take Internet radio stream and convert them from mp3 to raw PCM samples. Be careful, it has been noticed that earlier version have a memory leak when resampling. We use version 1.4.3 to avoid the problem.

Example that decode an mp3 stream, resample it to 48kHz and output the raw samples to stdout:

mpg123 -b 1024 -r 48000 -s http://maxxima.mine.nu:8000

mplayer

simple mplayer command for jack output

mplayer -ao jack http://maxxima.mine.nu:8000
Personal tools