Gnuradio DAB constellation using gr-dab and USRP
From Opendigitalradio
(Difference between revisions)
(→Installation) |
Latest revision as of 11:20, 22 November 2011
Plot in live the constellation diagram of a received DAB signal using gr-dab and USRP.
Contents |
[edit] Pre-requisites
- USRP or baseband recording from a file
- WBX daughterboard or modified RFX400 (TVRX daughterboard has too much phase noise and cannot be used)
- Linux PC with Gnuradio source (>=3.2)
- gr-dab tools
[edit] Installation
- Download source code of gnuradio and gr-dab tools
- Patch peak detector of gnuradio source code with patch/not-applied-in-trunk of gr-dab
- Patch "dab_rx_constellation.py" with patch below
- Configure, compile and install gnuradio and then gr-dab tools.
[edit] Usage
(dab_rx_constellation.py -h)
Usage: dab_rx_constellation.py: [options] <filename>
Options:
-h, --help show this help message and exit
-m DAB_MODE, --dab-mode=DAB_MODE
DAB mode [default=1]
-F, --filter-input Enable FFT filter at input
-c, --correct-ffe do fine frequency correction
-u, --correct-ffe-usrp
do fine frequency correction by retuning the USRP
instead of in software
-e, --equalize-magnitude
do magnitude equalization
-s RESAMPLE_FIXED, --resample-fixed=RESAMPLE_FIXED
resample by a fixed factor (fractional interpolation)
-S, --autocorrect-sample-rate
Estimate sample rate offset and resample (dynamic
fractional interpolation)
-R RX_SUBDEV_SPEC, --rx-subdev-spec=RX_SUBDEV_SPEC
select USRP Rx side A or B [default=A]
-f FREQ, --freq=FREQ set frequency to FREQ [default=227360000.0]
-r SAMPLE_RATE, --sample-rate=SAMPLE_RATE
set sample rate to SAMPLE_RATE [default=2000000]
-d DECIM, --decim=DECIM
set decimation rate to DECIM [default=32]
-g RX_GAIN, --rx-gain=RX_GAIN
set receive gain in dB (default is midpoint)
-v, --verbose verbose output
Example for plotting the constellation of an ensemble on 223.936MHz:
dab_rx_constellation.py -R A -f 223936000 -c -e -S
[edit] dab_rx_constellation.py patch
Index: dab_rx_constellation.py
===================================================================
--- dab_rx_constellation.py (revision 203)
+++ dab_rx_constellation.py (working copy)
@@ -91,8 +91,8 @@
self.demod = dab.ofdm_demod(self.dab_params, self.rx_params, verbose=self.verbose)
self.v2s = gr.vector_to_stream(gr.sizeof_gr_complex, self.dab_params.num_carriers)
- self.scope = scopesink2.constellation_sink(self.panel, title="DAB constellation sink", sample_rate=self.dab_params.sample_rate, frame_decim=3)
- self.scope.win.set_marker("plus")
+ self.scope = scopesink2.scope_sink_c(self.panel, title="DAB constellation sink", sample_rate=self.dab_params.sample_rate, frame_decim=3)
+ # self.scope.win.set_marker("plus")
# self.sink = gr.null_sink(gr.sizeof_char*self.dab_params.num_carriers/4)
self.trigsink = gr.null_sink(gr.sizeof_char)
